|
|
|
2. Rules and Stand Construction for Raw Space
1). Exhibitors and contractors of raw space booths must have no structure in their stand fitting higher than 5 meters, the vertical orthogonal projection can not exceed the scope of reserved area and two-storey stand can not exceed 7 meters in height. Exhibitors must keep neighboring space and the space behind their stands clean and in order.
If contractors violate the regulations and have no ability to revise the booth, the resetting work will be dealt with by Show Management’s official stand contractors at exhibitor’s own expense. The fee will be deducted from the deposit. The aisle in special design stand must be maintained safe and clear.
2). Confirmed items can not be revised without notice and must be conducted according to the plan. Construction is not allowed to exceed the approved scale and must be supervised and examined by the show management and the official stand contractor. Exhibitors are not allowed to revise their stand until they applied to official stand contractor and get approval from fire-fighting bureau. The show management reserves the right to stop electricity supply if any exhibitor doesn’t follow the rules.
3). No electric cutter, electric saw and spray-paint can be used on site. Every decoration material used for booth must be fireproof. Elastic cloth and Tungsten lamp over 150w are prohibited in anytime.
4). Safety helmet, belt and skid-resistant shoes are necessary for the contractors working over the height of 2 meters. The ladle must be prepared with skid-resistant working.
5). The maintaining work will be done by exhibitors’ appointed stand contractors.
6). Stand contractors appointed by the exhibitors for raw space shall report to the Service Department in advance for renting electricity facilities.
3. Safety Responsibility for Stand Construction
Exhibitor and contractors should strictly observe the Security Liability (for Raw Space Exhibitors)（Page 8-9）of Shanghai New International Expo Center (SNIEC). Exhibitors and contractors will be punished for any violation according to the regulations mentioned above.
II． Stand Design and Engineering
The four official contractors appointed by the Organizing Committee can provide exhibitors with the services of stand design plan, drawings review, engineering, on-site installation, maintain and dismantling. |
|
|
|
Sketch of Stand.Deadline: April 20,2009.You can apply for it by two means:
A. Login http://www.snec.org.cn/hyzc/snern_orgen/RegMember_reg.asp, register to be our member, enter the online registration area, fill out the form Sketch of Stand and submit it.
B. Download the order form and return the completed form to the Service Department of the Organizing Committee. Click Sketch of Stand to download.
Contact Us
Add: Room1008, No.1525, West Zhongshan Rd., 200235,Shanghai, China
Tel：0086-21-64380781
Fax：0086-21-64642653
E-mail：office@sneia.org |
|
QQ Communicating Room for Domestic Cooperation Dept：68601134 
